nogc_noproblem
08-05 02:29 PM
A couple drove down a country road for several miles, not saying a word.
An earlier discussion had led to an argument and neither of them wanted to concede their position. As they passed a barnyard of mules, goats, and pigs, the husband asked sarcastically, "Relatives of yours?"
"Yep," the wife replied, "in-laws."
An earlier discussion had led to an argument and neither of them wanted to concede their position. As they passed a barnyard of mules, goats, and pigs, the husband asked sarcastically, "Relatives of yours?"
"Yep," the wife replied, "in-laws."
wallpaper jersey shore season 4 august 4
sayantan76
12-29 11:20 PM
I agree with you. British occupied USA and India at around same time (1600) and USA got it's independence by 1789 and we had to wait until 1947. UK was very badly hurt post second world war and had to borrow money heavily from USA to pay for veterans and keep war time employment rates. Clement Atlee in his wisdom thought that UK can not maintain it's empire any longer and let go of colonies. Winston Churchill was opposed to this but could not prevail over Atlee. I admire Mahatma immensely. But let us not kid ourselves that we got independence solely based on peaceful independence struggle. To all those peaceniks, if you think non-violence is such a great weapon, why can't we scratch the whole army and use that massive defence budget for something else? If we are maintaining an army, we are going to use it some time.
at the risk of adding to this "no longer relevant" thread - there is a huge difference between US and India gaining independence.....in case of the former - it was some Britishers now settled in America fighting other Britishers (loyalists to the throne) for autonomy and independence......
India was perhaps the first successful example of natives gaining independence from a colonial European power....
also - to brush up on some more history - India was not occupied in 1600 - actually East India Company was established in that year.....the real establishment and consolidation of territorial control happened between two historical events (Battle of Plassey in 1757 and Sepoy Mutiny in 1857).....if we consider the 1757 date as start of colonization in true earnest - then India was independent in 190 years (1947 - 1757) against your calculation of 189 years for USA (as per your post - 1789-1600) - so not bad for a mostly non-violent struggle :-)
Also - one of the reasons Atlee thought it was too expensive to maintain colonies was because of all the Quit India and Civil Disobedience type regular movements -these movements took much political and military bandwidth that Britain simply did not have after the war.....if maitaining a colony was easy sailing - i doubt Britain would have given it up easily and we have to credit the non-violent movements for helping India becoming a pain in the neck for Britain......
at the risk of adding to this "no longer relevant" thread - there is a huge difference between US and India gaining independence.....in case of the former - it was some Britishers now settled in America fighting other Britishers (loyalists to the throne) for autonomy and independence......
India was perhaps the first successful example of natives gaining independence from a colonial European power....
also - to brush up on some more history - India was not occupied in 1600 - actually East India Company was established in that year.....the real establishment and consolidation of territorial control happened between two historical events (Battle of Plassey in 1757 and Sepoy Mutiny in 1857).....if we consider the 1757 date as start of colonization in true earnest - then India was independent in 190 years (1947 - 1757) against your calculation of 189 years for USA (as per your post - 1789-1600) - so not bad for a mostly non-violent struggle :-)
Also - one of the reasons Atlee thought it was too expensive to maintain colonies was because of all the Quit India and Civil Disobedience type regular movements -these movements took much political and military bandwidth that Britain simply did not have after the war.....if maitaining a colony was easy sailing - i doubt Britain would have given it up easily and we have to credit the non-violent movements for helping India becoming a pain in the neck for Britain......
Munna Bhai
08-03 06:10 AM
ok now i'm really confused between AC21 and future employment debate....
AC21 can be used after 6 months of 485 filing to change the job but then once u get GC you have to work for the original company that filed your 485 for few months?? so for e.g. if i change my job after lets say 1 year of 485 filing and lets say my 485 is approved after 3 years so now do i have to quit my new job and go back to my old employer to work for few months to get my gc? am i understanding this correct? i think i'm not... can you please clarify?? thnx
Hi United Nation,
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
AC21 can be used after 6 months of 485 filing to change the job but then once u get GC you have to work for the original company that filed your 485 for few months?? so for e.g. if i change my job after lets say 1 year of 485 filing and lets say my 485 is approved after 3 years so now do i have to quit my new job and go back to my old employer to work for few months to get my gc? am i understanding this correct? i think i'm not... can you please clarify?? thnx
Hi United Nation,
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
2011 dresses jersey shore season 4
delax
07-13 12:56 PM
Split up of 75-25 definitely covers interest of both parties. I don't think an EB2 with PD 2007 will have grudge over an EB3 PD 2002 getting his/her GC before. As a matter of fact, as you said, looking through the eyes of governance, I don't think it is illogical. EB3 has lower preference as compared to EB2 but not zero preference! So, an EB3 2002 getting his GC before EB2 2007 is not insane, again, per my belief. You cannot say 100-0 is justice - come on!
But the same 100-0 logic can be applied between EB1 and Eb2-India. How does EB1 of 2008 get it immediately but EB2-I waits more than 4 years (speaking for myself here) -clearly preference is at play here. if that makes sense then a 100-0 ratio for EB2/EB3 also makes sense
Honestly nothing makes sense - I am only trying to derive a rationale for the spill over logic used by DOS/USCIS.
But the same 100-0 logic can be applied between EB1 and Eb2-India. How does EB1 of 2008 get it immediately but EB2-I waits more than 4 years (speaking for myself here) -clearly preference is at play here. if that makes sense then a 100-0 ratio for EB2/EB3 also makes sense
Honestly nothing makes sense - I am only trying to derive a rationale for the spill over logic used by DOS/USCIS.
more...
mariner5555
04-17 03:16 PM
just in case people are wondering why the future of housing will continue to be bad ..here is the article.
http://blogs.marketwatch.com/greenberg/2008/04/mortgage-resets-the-fun-has-just-begun/?mod=MWBlog
------
�When they start talking about mortgage RESETS,� emailed Paul Jaber, a portfolio manager at the Perpetual Value Fund, �can you correct them and tell them the problem is RECASTS? They surely don�t know the difference��
Paul continued:
See, if you took out an option pay ARM loan in 2005 and bought a few properties like the hotshot 24-year old Southern California real estate mogul � on average you would be able to make 40 months of BELOW interest rate mortgage payments (I use the word payment loosely).
After about 40 months your 2% b.s. payment would make the loan grow to about 115% of the original amount and then � WHAMMO � your loan would recast to a 27-year fully amortizing mortgage. Your payments would go from $1,000 a month to over $3,000 and you would be walking around wondering, like �What is happening?� A good analogy is the three-year no-payment, no-interest Circuit City TV loan. The catch is that in month 37 you owe ALL back interest � usually about double the original charge.
The guys talking about resets are trying to confuse the situation. The option arm loan was very popular through 1Q07 - so take 40 months from that date, plus 3 months for them to go 90 days late and then and only will you see foreclosures start to level off.
To further drive home the point, Paul adds:
The reason why CFC, WM, WB, DSL and FED are all imploding is because the 2003 - 2004 pay option arm loans are all recasting and then going 90 days late. But all you need to know is pay option arm loans have a teaser payment that will last until the loan goes 110%-125% of original value and then the loan RECASTS to a fully amortizing loan. That is how a payment skyrockets - its simple math. Whereas payments can�t realistically double or triple with a simple ARM reset, most are capped every year - again the math is pretty simple.
The resets do indeed peak in the middle of this year and then taper off. It�s also true that the Fed cuts mean that the reset leads to no increase in monthly payments for about 20% of borrowers and for less than $100/month for another 20%, based on an article I read in the WSJ a few days ago. But:
1) That means for 60% of homeowners, the reset will more more than $100/month � for some, a lot more.
2) Mortgages with teaser rates written from Q1 05 - Q2 07 are defaulting at catastrophically high rates before the reset � a whole lotta people can�t even pay the teaser rates!
3) Bulls are missing the lag effects. It takes an average of 15 months from the date of the first missed payment to sale of the house, so the fact that resets are tapering off by the end of this year means the wave of foreclosures and home auctions the resets trigger won�t hit until mid to late 2009 into 2010.
http://blogs.marketwatch.com/greenberg/2008/04/mortgage-resets-the-fun-has-just-begun/?mod=MWBlog
------
�When they start talking about mortgage RESETS,� emailed Paul Jaber, a portfolio manager at the Perpetual Value Fund, �can you correct them and tell them the problem is RECASTS? They surely don�t know the difference��
Paul continued:
See, if you took out an option pay ARM loan in 2005 and bought a few properties like the hotshot 24-year old Southern California real estate mogul � on average you would be able to make 40 months of BELOW interest rate mortgage payments (I use the word payment loosely).
After about 40 months your 2% b.s. payment would make the loan grow to about 115% of the original amount and then � WHAMMO � your loan would recast to a 27-year fully amortizing mortgage. Your payments would go from $1,000 a month to over $3,000 and you would be walking around wondering, like �What is happening?� A good analogy is the three-year no-payment, no-interest Circuit City TV loan. The catch is that in month 37 you owe ALL back interest � usually about double the original charge.
The guys talking about resets are trying to confuse the situation. The option arm loan was very popular through 1Q07 - so take 40 months from that date, plus 3 months for them to go 90 days late and then and only will you see foreclosures start to level off.
To further drive home the point, Paul adds:
The reason why CFC, WM, WB, DSL and FED are all imploding is because the 2003 - 2004 pay option arm loans are all recasting and then going 90 days late. But all you need to know is pay option arm loans have a teaser payment that will last until the loan goes 110%-125% of original value and then the loan RECASTS to a fully amortizing loan. That is how a payment skyrockets - its simple math. Whereas payments can�t realistically double or triple with a simple ARM reset, most are capped every year - again the math is pretty simple.
The resets do indeed peak in the middle of this year and then taper off. It�s also true that the Fed cuts mean that the reset leads to no increase in monthly payments for about 20% of borrowers and for less than $100/month for another 20%, based on an article I read in the WSJ a few days ago. But:
1) That means for 60% of homeowners, the reset will more more than $100/month � for some, a lot more.
2) Mortgages with teaser rates written from Q1 05 - Q2 07 are defaulting at catastrophically high rates before the reset � a whole lotta people can�t even pay the teaser rates!
3) Bulls are missing the lag effects. It takes an average of 15 months from the date of the first missed payment to sale of the house, so the fact that resets are tapering off by the end of this year means the wave of foreclosures and home auctions the resets trigger won�t hit until mid to late 2009 into 2010.
SunnySurya
12-22 10:17 PM
Good post,
You post is a testimony that not all hope is lost with Islam. There are still people like yourselves who can think objectively or at least open to one.
And this is the reason why I am not against Islam as this would also mean that I am raising my fingers on the guys like urself.
Please quantify your response. There are numerous hindu groups that have worked for the upliftment of many. There are certain right wing hindu groups that do that just like there are many right wing muslims groups that target the other communities. As for Jinnah, I wonder if there would pakistan if he was offered the PM or the home minister. It is a rheotrical question and I doubt there is a clear answer.
Hindus have pretty much killed the practice of Sati and I doubt there will ever be such abominable events. Atleast they looked at it and removed it and that is praise worthy. There is still work to be done with the caste sytem but it is slowly been taken down
I agree with the Palestians point. I think that community is unfortunately the most beseiged and under one of the worst oppressors. Using religion to usurp their land and then making them prisoners in their own land in this age is unbelievable.
You post is a testimony that not all hope is lost with Islam. There are still people like yourselves who can think objectively or at least open to one.
And this is the reason why I am not against Islam as this would also mean that I am raising my fingers on the guys like urself.
Please quantify your response. There are numerous hindu groups that have worked for the upliftment of many. There are certain right wing hindu groups that do that just like there are many right wing muslims groups that target the other communities. As for Jinnah, I wonder if there would pakistan if he was offered the PM or the home minister. It is a rheotrical question and I doubt there is a clear answer.
Hindus have pretty much killed the practice of Sati and I doubt there will ever be such abominable events. Atleast they looked at it and removed it and that is praise worthy. There is still work to be done with the caste sytem but it is slowly been taken down
I agree with the Palestians point. I think that community is unfortunately the most beseiged and under one of the worst oppressors. Using religion to usurp their land and then making them prisoners in their own land in this age is unbelievable.
more...
Macaca
05-13 05:42 PM
What if you had to buy American? (http://money.msn.com/how-to-budget/what-if-you-had-to-buy-american.aspx) By Katherine Reynolds Lewis | MSN Money
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
Legions of patriotic Americans look for "made in USA" stickers before buying products, out of a desire to support the country's economy.
But what if we all were restricted to purchasing only those goods that were made in America?
Our homes would be stripped virtually bare of telephones, televisions, toasters and other electronics, and many of our favorite foods and toys would be gone, too. Say goodbye to your coffee or tea, and forget about slicing bananas into your breakfast cereal -- all three would become prohibitively expensive if we relied on only Hawaii to grow tropical crops.
We'd have to trash our beloved Apple products because the iPod, iPad and MacBook aren't made in the U.S. Gasoline would double or triple in price, given that we now import more than 60% of our oil. And you couldn't propose to your true love with a diamond ring: There are no working diamond mines in the U.S.
Moreover, a complete end to imports would actually hurt the U.S. economy, because consumers and domestic companies would lose access to cheap goods. Trade protections, whether through tariffs or quotas, cost the economy roughly $2 for every $1 in additional profit for domestic producers, said Mark Perry, an economics professor at the University of Michigan-Flint and a visiting scholar at the American Enterprise Institute, a conservative think tank.
"If we restricted trade to just the 50 states, what would happen immediately -- and would increase over time -- would be a huge reduction in our standard of living, because we wouldn't have access to the cheap goods we get from other countries," Perry said. "We also wouldn't have any export markets, so companies like Caterpillar and Microsoft would have a huge reduction in sales and workforce."
So what do we make of heartfelt pleas to save U.S. manufacturing by buying American, or the many websites (see one here) that catalog U.S. sources for an array of products? Or the Buy American Act, which curbs government purchases of products that are made overseas?
Do such efforts actually hurt the country they're trying to help?
The argument for buying American
Marc Kruskol, 53, a publicist based in Palmdale, Calif., goes out of his way to purchase products that are made in the U.S. because of his concern over the decline in manufacturing employment.
"I truly believe that we could go a long way towards fixing the economy if we would just put people to work making things in this country that are made in other places," said Kruskol, who spends hours scouring made-in-America websites or visiting brick-and-mortar stores in search of U.S. products.
He recently spent $10 on a pair of salad tongs made in America, which he tracked down in a restaurant supply store, after rejecting 99-cent foreign-made tongs. And he was happy to spend $650 on a domestically produced barbecue grill rather than a $450 imported one, just to support his countrymen.
But financial experts say that it's best for America if you buy the cheapest product you can find without sacrificing quality. Their explanation rests on the concept of efficient manufacturing. An efficient producer creates the most valuable goods with the least possible expense, selling those items at lower prices than competitors who are less efficient. A country benefits when its manufacturers become more efficient.
When you spend more on an equivalent product simply because it's made in the U.S., you're wasting your money -- and supporting an inefficient manufacturer that, by rights, should become more efficient or go out of business. Moreover, the additional $9.01 or $200 that Kruskol had spent on an inefficient U.S. producer could have been spent on something else, helping the economy further. Or it could have stayed in his savings account and been funneled by his bank into the financial system, which in theory allocates capital to the most efficient producers.
"He gave effectively $9 to an inefficient producer to motivate them to keep producing inefficiently," said Ken Fisher, the founder and CEO of Fisher Investments in Woodside, Calif., and the author of "Debunkery." "I understand the well-intentioned view. Doing that would be terrible for America."
The most efficient producers are best-positioned to create more jobs and return profits to their investors, and to the government in the form of tax revenue. "We make the country better by allocating resources towards the ones that can use them best," Fisher said.
The complex manufacturing question
At the heart of the issue are the interconnected global economy and the changes in the manufacturing sector.
There's no question that U.S. manufacturers employ far fewer people now -- about 11.7 million in April -- than when the sector peaked at 19.6 million workers in 1979. But the decline in jobs is largely due to technological advances that have reduced the number of workers needed to run factories, Perry and Fisher pointed out. The average worker today is responsible for $180,000 of manufacturing output, triple the inflation-adjusted $60,000 of 1972, Perry said.
Despite that increase in productivity, a March report by IHS Global Insight put China's manufacturing output ahead of the U.S. for the first time ever, at $2 trillion in 2010, compared with $1.95 trillion for the U.S. That's up from $1.69 trillion for China and $1.733 trillion for the U.S. in 2009, based on U.S. and Chinese government data.
But Perry argued that exchange-rate fluctuations and differences in data sources caused the IHS Global report to skew the comparison between the U.S. and China. Based on U.N. data for 2009, the most recent available, the United States' manufacturing output was 14% ahead of China's, he said.
Moreover, as manufacturing has declined as a share of the U.S. economy while the service sector has grown, most of the world has followed the same trend. The proportion has held steady in China.
"We've left the Machine Age, and we're in a new Information Age. It makes sense that manufacturing would be less important," Perry said, noting that as other countries have taken over clothing and other low-end manufacturing, the U.S. has become more competitive in producing pharmaceuticals, software, aerospace technology, industrial machinery and medical equipment. "We're still world leaders and at the cutting edge of those higher-skilled, higher-valued-added areas."
Not convinced yet? The other conundrum in trying to buy only U.S.-made products lies in what that really means.
Do you accept products that are assembled in America but contain components from all over the globe? For example, U.S. companies in February imported $58 billion worth of industrial supplies, such as petroleum and plastics, and $40 billion in capital goods, from computers to engines and laboratory equipment.
What about products that are assembled in China yet include parts from U.S. suppliers and were designed by American engineers? Every time you purchase such an item, the money will flow back to those American engineers and suppliers.
Cars.com's American-Made Index illustrates U.S. industries' complex trade relationships. The website ranks vehicles built and purchased in the U.S. based on sales, the origin of the cars' parts and whether assembly was in the U.S. The top two cars -- Toyota Camry and Honda Accord -- are produced by Japanese companies through their U.S. subsidiaries.
"On the surface, it seems like it might be plausible to have these 'made in the USA' campaigns," Perry said. "It all gets real tricky in a global economy with parts."
When buying American helps
That's not to say you should ignore the origins of the goods you buy.
When comparing two products of equivalent price and quality, feel free to choose the U.S.-made one out of domestic pride. It may make sense to buy a U.S.-made product if the quality or safety is superior.
Alex Kaplan, 41, the owner of Celebrity Laser Spa in Los Angeles, recently bought a pair of ottomans online for $120, only to find them cracked and cheaply made. After returning the made-in-China set, he found a craftsman through Etsy who made similar ottomans for $160 but allowed customers to choose the fabrics.
"It's much more satisfying," said Kaplan, whose blog chronicles his attempts to find products made in the U.S. "The most important thing when it comes to buying American is being aware and asking yourself, 'Where is this made?'"
Is College a Rotten Investment?
Why student loans are not like subprime mortgages. (http://www.slate.com/id/2293766/)
By Annie Lowrey | Slate
2010 #39;Jersey Shore#39; Season 4 may be
thatwillbeit
10-03 12:36 PM
Excellent post dtekkedil
You reiterate exactly what I have in my mind
You reiterate exactly what I have in my mind
more...
suavesandeep
06-20 08:07 PM
You actually nailed down exactly what i have been thinking...
Its just seems impossible to get a decent house which is not 25+ in Cupertino, Redwood shores etc ..And my gut feeling is these places the homes will never be affordable, they may lose some value but not much.
I have also been debating about Austin as an alternative. Again what field you work in also plays a big role in the decision. if you are a techie and work in a product based company Bay area has all the top companies you could wish to work for. Where as cities like Austin merely have satellite offices for these companies based in bay area. I guess if you work in the service industry you would have more choices to pick from. Plus reason to consider austin for me is that "Austin is very much like bay area" ... In that case i think why not live in Bay area itself :)
But yes if you are in bay area, Paying 700+ for a decent place just does not make sense even with all the rebates.
I am hoping my gut feeling is proven wrong :)
This is for sharing and suggesting your views, ( :)who are not opposing for buying a home now or in the near future and those who are staying at Bay Area, CA or similar places in US) where the medium home price is still looks like quite unaffordable :
for example, in Bay Area, CA - places which has good school districts and neighbourhoods like Cupertino, Fremont, Redwood shores etc., (please add other good places also...) - the medium home price of a new independant home (anywhere from 1500 to 3000 sq.feet) will be atleast in the price range of $700000 - 2+ Millions.
Other options are :
1) Moving to the outskirts, around 40 or 50+ miles - places like San Ramon, Gilroy etc. (remember commute will be too hectic...). In these places also, the above mentioned homes will cost $450000 and up.
2) Go with an old condo/town home (in Bay Area, usually an old house is 25+ years YOUNG!!!) and after 5+ years look for an old independant home and after another 5+ years, move to your dream home. (I don't know whether we, most of us who are in the GC mess might be in 35 and above age group, have any juice left to do so rather than try to settle down within a couple of years. And one more thing, are these places really worth for spending this much for houses? (I know its a personal choice and lot of factors come in to play...)
3) Move to a more affordable place so that even if there are some hick ups in career or other ups and downs in life, it won't affect the mortage payment (considering ones personal interests and other factors like employment opportunities, climate, diversed community etc etc.) - places like Dallas, Austin, Phoenix, Atlanta etc. (feel free to add other cities also).
Please comment/share your thoughts (I am agreeing there may be slight variation in above price ranges) and really sorry if we discussed this in any other threads....
Thanks,
B+ve
Its just seems impossible to get a decent house which is not 25+ in Cupertino, Redwood shores etc ..And my gut feeling is these places the homes will never be affordable, they may lose some value but not much.
I have also been debating about Austin as an alternative. Again what field you work in also plays a big role in the decision. if you are a techie and work in a product based company Bay area has all the top companies you could wish to work for. Where as cities like Austin merely have satellite offices for these companies based in bay area. I guess if you work in the service industry you would have more choices to pick from. Plus reason to consider austin for me is that "Austin is very much like bay area" ... In that case i think why not live in Bay area itself :)
But yes if you are in bay area, Paying 700+ for a decent place just does not make sense even with all the rebates.
I am hoping my gut feeling is proven wrong :)
This is for sharing and suggesting your views, ( :)who are not opposing for buying a home now or in the near future and those who are staying at Bay Area, CA or similar places in US) where the medium home price is still looks like quite unaffordable :
for example, in Bay Area, CA - places which has good school districts and neighbourhoods like Cupertino, Fremont, Redwood shores etc., (please add other good places also...) - the medium home price of a new independant home (anywhere from 1500 to 3000 sq.feet) will be atleast in the price range of $700000 - 2+ Millions.
Other options are :
1) Moving to the outskirts, around 40 or 50+ miles - places like San Ramon, Gilroy etc. (remember commute will be too hectic...). In these places also, the above mentioned homes will cost $450000 and up.
2) Go with an old condo/town home (in Bay Area, usually an old house is 25+ years YOUNG!!!) and after 5+ years look for an old independant home and after another 5+ years, move to your dream home. (I don't know whether we, most of us who are in the GC mess might be in 35 and above age group, have any juice left to do so rather than try to settle down within a couple of years. And one more thing, are these places really worth for spending this much for houses? (I know its a personal choice and lot of factors come in to play...)
3) Move to a more affordable place so that even if there are some hick ups in career or other ups and downs in life, it won't affect the mortage payment (considering ones personal interests and other factors like employment opportunities, climate, diversed community etc etc.) - places like Dallas, Austin, Phoenix, Atlanta etc. (feel free to add other cities also).
Please comment/share your thoughts (I am agreeing there may be slight variation in above price ranges) and really sorry if we discussed this in any other threads....
Thanks,
B+ve
hair All New Jersey Shore Season 4
pthoko
07-11 10:48 AM
Your last action dictates the status you are in. As the last I-94 has H1 Status, you have 30 days to start working with new employer (or apply for CoS to stay on L1). It is usually a good idea to file H1 without Change of Status if you don't know the start date. In that case you have to re-enter US on that visa to get into that status.
I would always suggest the real dates on any form. Section 245(k) covers out-of-status issues. Why lie and caught for fraud when we have protection under law.
If caught for fraud, it can cause some very serious issues. I-485 can be denied just on this basis.
1. Re-entry erases out-of-status and puts one in valid status. As per section 245(k), one is required to be instatus (or out of status < 180 days) since last entry into US.
2. You were out-of-status, not unlawful presence (i.e. staying past due I-94 date). So visa can not denied on the basis of out-of-status.
3. Not sure about getting visa from Canada. Is it your first time for getting H1 visa stamp?
________________________
Not a legal advice.
Yes H1B is NOT Stamped yet.
I would always suggest the real dates on any form. Section 245(k) covers out-of-status issues. Why lie and caught for fraud when we have protection under law.
If caught for fraud, it can cause some very serious issues. I-485 can be denied just on this basis.
1. Re-entry erases out-of-status and puts one in valid status. As per section 245(k), one is required to be instatus (or out of status < 180 days) since last entry into US.
2. You were out-of-status, not unlawful presence (i.e. staying past due I-94 date). So visa can not denied on the basis of out-of-status.
3. Not sure about getting visa from Canada. Is it your first time for getting H1 visa stamp?
________________________
Not a legal advice.
Yes H1B is NOT Stamped yet.
more...
satishku_2000
05-16 12:09 AM
What do you about how I came to the country!? I came here to take a full-time job with an American employer. I get paid above minimum wage and had a solid offer for the job BEFORE the company submitted the H-1B application.
I do realize a lot of people will be out of a 'job' (or off the bench, depending on how you look at it) with the elimination of body shopping. But guess what -- they shouldn't even be here in the first place if they don't have full-time jobs. As said before, they clog up an otherwise great visa program.
I'll give you the reason they are concerned --- the visas for the coming fiscal year emptied out IN ONE DAY, obviously indicating the H-1B program is infected with abuse beyond anyone's expectations. They are out to put and end to that charade.
I don't know what the deal is with India, but apparently more than 40% of all H-1B applications come from India based companies, for 'employees' from India. For this reason congress recently got in contact with the biggest of these companies for an explanation. Hopefully these actions will pave the way for more legit visas for the rest of us. Now don't get me wrong -- I have absolutely nothing against people from India. In fact I have really good impressions with people from India in general. But I (and congress) expect them to obey the law like everybody else.
mbdriver
The deal with india is its home to billion people on the planet. Most of these companies recruit from India for same reason why Walmart gets most of its products from China. Free markets and Globalization is not a one way street. If american companies are so good and so caring they dont outsource , they outsource to further their bottomlines. If American companies dont want to outsource all these consulting companies will go out of business overnight.
As far as your comments about employees from India .. most of these companies are listed in NASDAQ and NYSE (INFY, SAY, WIT).. At least some americans are share holders/owners of these companies. Dont be surprised to know the fact that some americans are on the boards of these companies .Let me make one thing clear, I am not a big fan of these companies , Infact I used work for of these companies and I have first hand experience how these companies treat their employees.
If any one violates any law he or she should be brought to justice. I am not quite sure what laws these companies have violated. In this country any one is innocent till proven guilty.
I totally understand your frustration with your VISA situation and hope and pray that you win VISA in the "lottery" .
I do realize a lot of people will be out of a 'job' (or off the bench, depending on how you look at it) with the elimination of body shopping. But guess what -- they shouldn't even be here in the first place if they don't have full-time jobs. As said before, they clog up an otherwise great visa program.
I'll give you the reason they are concerned --- the visas for the coming fiscal year emptied out IN ONE DAY, obviously indicating the H-1B program is infected with abuse beyond anyone's expectations. They are out to put and end to that charade.
I don't know what the deal is with India, but apparently more than 40% of all H-1B applications come from India based companies, for 'employees' from India. For this reason congress recently got in contact with the biggest of these companies for an explanation. Hopefully these actions will pave the way for more legit visas for the rest of us. Now don't get me wrong -- I have absolutely nothing against people from India. In fact I have really good impressions with people from India in general. But I (and congress) expect them to obey the law like everybody else.
mbdriver
The deal with india is its home to billion people on the planet. Most of these companies recruit from India for same reason why Walmart gets most of its products from China. Free markets and Globalization is not a one way street. If american companies are so good and so caring they dont outsource , they outsource to further their bottomlines. If American companies dont want to outsource all these consulting companies will go out of business overnight.
As far as your comments about employees from India .. most of these companies are listed in NASDAQ and NYSE (INFY, SAY, WIT).. At least some americans are share holders/owners of these companies. Dont be surprised to know the fact that some americans are on the boards of these companies .Let me make one thing clear, I am not a big fan of these companies , Infact I used work for of these companies and I have first hand experience how these companies treat their employees.
If any one violates any law he or she should be brought to justice. I am not quite sure what laws these companies have violated. In this country any one is innocent till proven guilty.
I totally understand your frustration with your VISA situation and hope and pray that you win VISA in the "lottery" .
hot Jersey Shore Season 4 Goes To
senthil1
05-16 06:55 PM
Permanent lc for for the future job. Current job is different than future job though they are similar. H1B is for current job.
But it does not impact much if Skil bill comes. Most of the persons PD will become current and anyone who gets H1b will get GC within 1 or 2 years. So no need for H1b extension. If Skil bill comes with Durbin proposal then most of the negative issues will be resolved by increasing more gcs. Infact substitution elimination also not needed if Skil bill comes as PD will become current always.
You did not answer my question about why some one with permanent labor certificate has to go thru the process of advertisement process for H1B renewal?
In my case DOL labor took almost 3 years to certify my labor certificate which states that I am not displacing any american worker. I think 3 years is a good time to find whether I am displacing american worker or not.
This law simply goes too far in the name of preventing abuse. I just dont get why someone working for same company and whose GC petition is pending(GC labor approved) has to prove every year that he is not displacing an american worker.
But it does not impact much if Skil bill comes. Most of the persons PD will become current and anyone who gets H1b will get GC within 1 or 2 years. So no need for H1b extension. If Skil bill comes with Durbin proposal then most of the negative issues will be resolved by increasing more gcs. Infact substitution elimination also not needed if Skil bill comes as PD will become current always.
You did not answer my question about why some one with permanent labor certificate has to go thru the process of advertisement process for H1B renewal?
In my case DOL labor took almost 3 years to certify my labor certificate which states that I am not displacing any american worker. I think 3 years is a good time to find whether I am displacing american worker or not.
This law simply goes too far in the name of preventing abuse. I just dont get why someone working for same company and whose GC petition is pending(GC labor approved) has to prove every year that he is not displacing an american worker.
more...
house hot Jersey Shore Season 4 Premiere jersey shore season 4 premiere. jersey
rbalaji5
07-13 10:33 PM
I have drafted a Petition (Version 1).
http://immigrationvoice.org/forum/showthread.php?p=262309#post262309
Excellent letter. - I support even I am EB2.
One should not point other category and ask for the right.
http://immigrationvoice.org/forum/showthread.php?p=262309#post262309
Excellent letter. - I support even I am EB2.
One should not point other category and ask for the right.
tattoo Jersey Shore Season 4 Dont
cinqsit
03-26 02:08 PM
UnitedNations,
So whats the way out for people who get into this situation ? Find a job with a non-consulting company and start everything H1/GC from scratch ?
cinqsit
So whats the way out for people who get into this situation ? Find a job with a non-consulting company and start everything H1/GC from scratch ?
cinqsit
more...
pictures Jersey Shore Season 4 Goes to
ssa
07-14 09:16 PM
I'm not from PERM. I got my labor approved the old way. In any case, this is far different from your own wording in the petition which implies *DOL* suggested that you apply in EB3. From you own post what happened was DOL rejected EB2 application and then the applicant re-applied in EB3. The very fact that PD could not be ported among the two applications shows that these two application were completely unrelated which again goes against your petition's stand there is no real difference between most of those stuck in EB3 backlog and EB2.
I'm neither trying to split hairs here nor trying to pick a fight with you. All I'm trying to say if you are planning to send hundreds of petitions to government agencies like DOL and USCIS they better be factual and accurate or else we may end up inviting more troubles unintentionally. That's why the title "Devil is in the details"!
Oh yes...today there are people who applied in early 2001(EB2-RIR) ...and waited untill end of 01 to get a NOD from DOL and then re-applied again in mid of 02 without retaining thier original PD of 01(EB3 Non RIR)..do you know?..most of you are from PERM that's why you are finding it odd ..!..DOL while sending back these cases did not let them retain thier PD's..
we were qualified to apply in eb-2 and RIR and the economy and the WTC attacks made things worse..
:)
I'm neither trying to split hairs here nor trying to pick a fight with you. All I'm trying to say if you are planning to send hundreds of petitions to government agencies like DOL and USCIS they better be factual and accurate or else we may end up inviting more troubles unintentionally. That's why the title "Devil is in the details"!
Oh yes...today there are people who applied in early 2001(EB2-RIR) ...and waited untill end of 01 to get a NOD from DOL and then re-applied again in mid of 02 without retaining thier original PD of 01(EB3 Non RIR)..do you know?..most of you are from PERM that's why you are finding it odd ..!..DOL while sending back these cases did not let them retain thier PD's..
we were qualified to apply in eb-2 and RIR and the economy and the WTC attacks made things worse..
:)
dresses Jersey Shore Cast in Forence
GCNaseeb
08-02 04:00 PM
Welcome back and Thanks very much for your valuable suggestions.
I have an important question for you and would request your suggestion:
Here's my situation: I am working for my current employer from last 6 years. My I-485 has been filed last week through my employer's attorney. My EB3 I-140 approved and I am on 9th year of h1-B. My H1-B expires in January next year. I have 3 other dependants on H4.
Now my current employer is trying to either fire me off or reduce my work hours to about 8 hrs / week.
What would be my best option to take decision?
1. Should I :
a. Stay home untill the expiry of 6 months and invoke AC21 after that? or
b. transfer my H1-B to some other employer and start working on H1-B and just wait for 6 months to invoke AC21?
2. Can my current employer reduce my hours legally? Meaning if they have to alter my H1-B to 8 hrs per week what will happen to my H1-B? Can i still able to transfer my H1-B to new emploer to work for 40Hrs/week if I want to?
The problem is- if they can't reduce my hours legally, I may be fired. And, if I get fired, they will revoke my H1-B on the same day but won't revoke my I-140 untill 6 months.
What do you suggest to help both me and my employer?
Thanks a lot for your valuabale suggestion and helping me out.
I have an important question for you and would request your suggestion:
Here's my situation: I am working for my current employer from last 6 years. My I-485 has been filed last week through my employer's attorney. My EB3 I-140 approved and I am on 9th year of h1-B. My H1-B expires in January next year. I have 3 other dependants on H4.
Now my current employer is trying to either fire me off or reduce my work hours to about 8 hrs / week.
What would be my best option to take decision?
1. Should I :
a. Stay home untill the expiry of 6 months and invoke AC21 after that? or
b. transfer my H1-B to some other employer and start working on H1-B and just wait for 6 months to invoke AC21?
2. Can my current employer reduce my hours legally? Meaning if they have to alter my H1-B to 8 hrs per week what will happen to my H1-B? Can i still able to transfer my H1-B to new emploer to work for 40Hrs/week if I want to?
The problem is- if they can't reduce my hours legally, I may be fired. And, if I get fired, they will revoke my H1-B on the same day but won't revoke my I-140 untill 6 months.
What do you suggest to help both me and my employer?
Thanks a lot for your valuabale suggestion and helping me out.
more...
makeup wallpaper Jersey Shore Season
sidchhikara
04-06 10:24 PM
But congress needs to find some solution for H1b mess like applying 150k H1b in one day. If no alternative solution is suggested some part/all part of this bill may be considered. US companies will not be impacted as they are not h1b dependent and they are hiring more than 50% US workers so they may not oppose that much. If Microsoft lobby for 200k H1b but still if they could not get any h1b why will they lobby it? American companies will either ask unlimited H1b or restrictions for bodyshopping so that everyone will get fair share of H1b. Lottery is shame as many deserving candidates will be rejected but many lower grade people may enter there is no merrit in selection of H1b. If IV is opposing this they need to give some solution for H1b mess. Otherwise no point. Also the bill was introduced by both Democrat and Republican. So Whether it is passed or not it is going to be considered
what are you saying? The above post is totally incoherent
what are you saying? The above post is totally incoherent
girlfriend New Season Of Jersey Shore On
conchshell
08-06 10:09 AM
All monkeys also interfiled and became lions.
This is too funny ... monkeys interfiling and becoming Lions :D:D
This is too funny ... monkeys interfiling and becoming Lions :D:D
hairstyles hot Jersey Shore Season 4 gets a jersey shore season 4 cast. of Jersey Shore
sanjaymk
08-05 05:34 PM
no joke list is complete without little johnny's joke..here is one. This is the only decent one that I found which will not get me into trouble here..
Little Johnny's teacher asks, "George Washington not only chopped down his father's Cherry tree, but also admitted doing it. Do any of you know why his father didn't punish him?"
Little Johnny replies, "Because George was the one holding the axe?
Little Johnny's teacher asks, "George Washington not only chopped down his father's Cherry tree, but also admitted doing it. Do any of you know why his father didn't punish him?"
Little Johnny replies, "Because George was the one holding the axe?
apt29
08-05 03:24 PM
Those are not in IT are caught in between the IT folks!
unitednations
08-03 01:52 PM
Hi United Nation,
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
No; it is not hard to use.
However; the way people use labor substitution, future base employment, labors in fast processing states, going from consulting companies to "permanent jobs"; job descriptions not matching, companies getting ability to pay queries on approved cases; uscis changing their interpretations of laws/regulations, people getting off h-1b after six years.... all of these things add a lot of complexities.
If AC21 is so difficult to use what about EAD?? Is all these apply to EAD too??
-M
No; it is not hard to use.
However; the way people use labor substitution, future base employment, labors in fast processing states, going from consulting companies to "permanent jobs"; job descriptions not matching, companies getting ability to pay queries on approved cases; uscis changing their interpretations of laws/regulations, people getting off h-1b after six years.... all of these things add a lot of complexities.
No comments:
Post a Comment